Wireline/Workstring Set Packers

Increase completion effectiveness

These packers offer a variety for setting methods for the most effective completion and most efficient installation in a wide range of applications.

D™ and DB™ packers are ideal as permanent squeeze or testing packers or as permanent or temporary bridge plugs. Their solid construction enables a significant rig time saving with a 50% faster run-in without fear of impact damage or premature setting. Two opposed sets of full-circle, full-strength slips ensure these packers will stay where set.

DV™ packer is an economical option for many HP/HT applications by isolating a lower zone by installing a plug in the profile of the seal nipple and permitting removal of the tubing string. Disengaging the workstring by a one-quarter turn rotation offers minimal tubing manipulation, which is ideally suited to deviated wells. The large ID is desirable in small packer sizes.

F-1™ and FB-1™ packers can be used for production, injection, and zonal isolation as sump packers, squeeze or test packers, or as permanent or temporary bridge plugs. Solid, slim-line construction and a packing element system that resists swab-off enables a faster run-in time without fear of impact damage or premature setting. This technology packs off securely and permanently when these packers are set. Two opposed sets of full-circle, full-strength slips ensure the packers will stay where set.

FB-3™ high-pressure retainer production packer is designed for deep well tests where high hydrostatic annulus pressures can be encountered. The most common use of this packer is in high-pressure DST completions where possible evacuations of tubing fluids during perforating induce extreme loads on packers. This packer is rated for differential pressures up to 15,000 psi, depending on size. For high-pressure applications, this has the largest possible opening through the packer.

Reliant Series WL tubing-retrievable production packer allows you to set on electric wireline and retrieve without a separate retrieving tool. The packer is ideal as a standard completion packer in HP/HT wells or as a temporary bridge plug to perforate and stimulate an upper zone while isolating a lower zone.

HORNET™ EL tubing retrievable production packer is used as a standard completion packer in HP/HT wells or as a temporary bridge plug to perforate and stimulate an upper zone while isolating a lower zone.

Additional Resources

Brochures / Overviews