Overview

Our 200350 and 200355 Accelerometers are appropriate for condition monitoring of general purpose machinery.

The 200350 is certified for use in hazardous areas by the North American and European standards CSA, ATEX and IECEx.  Its sensitivity is 100 mV/g ±20% with a frequency range of 0.5 Hz to 10 kHz.

The 200355 offers a tighter tolerance on sensitivity of 100 mV/g ±5% and a frequency range that extends to a lower frequency of 0.2 Hz to 10 kHz. The 200355 is not approved for use in hazardous areas.

The 200350 and 200355 models both accommodate a maximum amplitude of 50 g peak.

Please review the 200350/200355 Accelerometers Datasheet for detailed specifications.

Product Features

Product Features
Provides protective housing

Installed in 43217 (standard) or 37442 (high-temperature) housings to protect against adverse environmental conditions. Mounts the accelerometer onto the surface of the monitored component for optimal frequency response.

Offers cable options

Three interconnect cables available with a threaded female connector at the accelerometer end and terminal lugs at the monitor end. Standard cable suitable for most installations. Standard cable lengths range from 6 ft (1.8 m) to 99 ft (30 m). Non-standard lengths available as custom options.




Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.