Talk to an Expert




  • Extremely robust and compact design with single-sealed housing to withstand extreme pressures and temperatures
  • Compact and standard package eliminates high-cost platforms and enables easy and fast installation
  • Vertical orientation protects electric motor from raw process gas, drains liquids. and reduces the module's overall footprint

  • Available with power up to 15 MW, with the same pressure and flow ranges as conventional natural gas compression applications
  • Active magnetic bearings eliminate oil system and dry gas seal for higher uptime
  • Diffuser separation system and dust removal device for wet gas compression

  • Subsea gas boosting



The Blue-C™ subsea compression module is a viable solution to extract resources that were previously not economically recoverable. Driven by a gas-filled, high-speed electric motor, and stacked in a vertical orientation, the single-sealed package enables easy installation, and ensures reliable production for up to five years.





Max. pressure rating


205 bar



Max. flow


18,000 m3 hourly production flow



Inlet volume


180,000 m3/hr




Vertical: electric motor on top; single shaft line (rigid coupling)


Operating speeds


3,000 to 11,000 rpm


Centrifugal compressor


Up to 6 stages, NACE compliant


Electric motor


12.5 MW, natural gas cooled, 6.6 kV/1.6 kA


Active magnetic bearings


3 canned radial AMBs, 1 canned axial ABM




6 m x 2 m


Weight (without cooler)


55 tons


Mean time to failure


5 years



The high-tech solution for low-margin wells

The Blue-C™ subsea compression module includes a number of creative engineering solutions that have resolved the significant technical challenges associated with highly reliable yet unattended operation. For example, Blue-C™ successfully eliminates dry gas seals using a gas-filled motor, special materials, and design procedures specifically developed for this application.

Blue-C High Tech


Product qualification

In 2010 at our Le Creusot facility, the first prototype successfully underwent complete factory acceptance test (FAT), mechanical running test, full-load test, and vertical landing test at full scale. In 2011, Blue-C™ was fully validated in a real gas reservoir in Nyhanma, offshore Norway, with a two-year submerged test including seawater cooler, marinized control system, variable-speed drivers, and complete endurance testing. The machine was subjected to more than 294 start-ups, ran at maximum power for more than 72 hours, and was extensively tested in both design and upset conditions for more than 280 days. Results illustrate that Blue-C™ provides excellent reliability under pressure.

Blue-C Product Qualification


Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.