Highlights

Highlights


Benefits
  • Save time and trips through multiple operating modes
  • Remove sand and solids in a single run
  • Vacuum drilling mud, stimulation fluids, and other reservoir fluids and enable production inflow profiling
Features
  • Ultra-low-pressure reservoirs
  • Well cleanup and unloading
  • Operating areas constrained in the use of nitrogen due to costs and logistics

Overview

Overview

When standard circulation methods aren’t sufficient to clean your ultralow-pressure wellbores, count on Sand-Vac™ and Well-Vac™ solutions from Baker Hughes. Using a combination of concentric coiled tubing (CCT) and a proprietary downhole switchable jet pump, these solutions effectively remove solids and liquids from your wells, without the need for nitrogen.  

The systems operate by pumping liquid down the inner coiled tubing string and through the jet pump nozzle. This creates a localized pressure drop that essentially vacuums wellbore fluids and entrained solids from the reservoir. These cleanout systems isolate the fluids from your reservoir and allow continuous returns. And by avoiding the need to store nitrogen, these solutions provide significant benefits for cleanout operations that have issues related to supply, logistics, or platform deck space.

Used in extended-length producing intervals, these systems handle crossflow or thief-zone challenges that hamper conventional circulation cleanouts. The tools also incorporate optional built-in pressure and temperature memory gauges to collect accurate downhole data.

 

Meet multiple objectives in a single run

While deployed in the well, the systems can be switched between multiple operating modes to achieve all of your objectives in a single run.

  • The Well-Vac mode increases the localized pressure drawdown to vacuum wellbore fluids, drilling mud, stimulation fluids, and other liquids from the reservoir.
  • In Sand-Vac and Well-Vac mode, the combined return flow enters the jet pump diffuser and recovers pressure from the nozzle to drive the return fluids to the surface via the CCT annulus.
  • A high-pressure jetting mode diverts all circulated flow through high-pressure nozzles to break and loosen consolidated sand bridges or place stimulation fluids. In this mode, no flow is routed to the jet-pump and no returns are taken to surface.

Contact us today to learn how Sand-Vac and Well-Vac solutions can optimize cleanouts in your ultralow-pressure wellbores.



Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.