Highlights

Highlights


Benefits
  • Make precision downhole pipe cuts, without ballistics or hazardous chemicals
  • Make oriented incisions to allow for 360° distribution of cleaning fluid/cement pumped downhole
  • Switch between slot cuts and full pipe cuts downhole, saving rig time and cost
Applications
  • Well interventions where full cuts are required
  • Interventions requiring slots to equalize between annuli or create flow area communication

Overview

Overview

Save time and money in your intervention operations with the MPC DUO™ advanced application tubing cutter from Baker Hughes. Make full pipe cuts and create oriented slot cuts downhole from one tool in a single trip, safely and efficiently.

The MPC DUO advanced application tubing cutter combines the functionality of two proven cutter tools:

  • The industry-leading Mechanical Pipe Cutter (MPC™), noted for its ability to cleanly and safely cut many types of oilfield pipe without using ballistics
  • The MPC InCision™ slot cutter, which makes precise punch/slot openings in tubing or casing without explosives

This dual functionality gives you the flexibility to conduct a range of incisions or full cuts in the same downhole run, without the need for tool reconfigurations between cuts. In MPC InCision mode, the MPC DUO advanced application tubing cutter can make 360° orientated slots in the downhole pipe for optimal flow efficiency.

With real-time telemetry data, you can continuously monitor the cutting blade’s position and progress. Confirm that each slot dimension has been made for accurate flow creation, without damaging outer strings or screens.

You can make multiple incisions at the same depth, with no need to close anchors or re-correlate the tool. And, with no need to pull out of hole to reconfigure or change the tool, you can easily switch from slot cut to full cut mode at any time.

The MPC DUO advanced application tubing cutter contains a number of additional features that aid your intervention operations, including:

  • The tool is available in various sizes to cut pipe ranging from 27/8-in. to 7-in. (73-mm to 178-mm) OD
  • Surface software monitors and controls the cutting operation in real time
  • The tool creates small metal filings with an average size of 0.004 in. (0.1 mm) for easy cleanup
  • The tool is applicable in a wide variety of metallurgies including steel, Inconel, and chrome
  • The tool is safely transportable for easy mobility and setup in the field

Contact us today to learn more about how the MPC DUO can save cutting time and costs on your intervention operation.

Resources

Overview
MPC DUO advanced application tubing cutter - Get precise slot cuts and full pipe cuts from one tool in a single run
PDF
PDF: 384.13 KB
.PDF 384.13 KB
Case Study
Remote wireline operation enabled precise pipe cut in real time to save producing well
PDF
PDF: 134.46 KB
.PDF 134.46 KB
Case Study
MPC tool performed multiple cuts under compression in a single operation, saved 24 hours rig time
PDF
PDF: 122.43 KB
.PDF 122.43 KB
Case Study
Baker Hughes cuts and recovers complex tubing and upper completion, reduces unnecessary trips
PDF
PDF: 181.85 KB
.PDF 181.85 KB


Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.