Highlights

Highlights


Benefits
  • Gain salinity-independent fluid saturation analysis •
  • Get forward-looking curve response analysis from pre-job modeling
Applications
  • Formation fluid saturation monitoring during production
  • Gas cap buildup monitoring
  • Reevaluation of marginal fields

Overview

Overview

Gain detailed insights for your formation fluid saturation monitoring with the OmniViewTM three- phase fluid saturation analysis service from Baker Hughes. Using a triangulation technique, the service simultaneously analyzes gas vs. liquid and oil vs. water saturation measurements to calculate quantitative three-phase saturation in your formation. The result: a transparent and reliable saturation analysis that you can use to optimize your reservoir’s ongoing  production strategies.

Quantitative saturation through casing

The OmniView service gives you quantitative analysis with wireline logging through casing. The service incorporates measurements from the Baker Hughes GasView™ quantitative gas saturation analysis service, which provides salinity-independent quantitative gas vs. liquid saturation measurements.

The service also incorporates the carbon/oxygen (C/O) analysis obtained from the Baker Hughes Reservoir Performance Monitor™ (RPM™) service. The industry’s first multi-detector pulsed neutron instrument, the RPM service provides salinity-independent oil vs. water saturation measurements.

The OmniView service incorporates measurements from the GasView and RPM services into Monte Carlo N-Particle (MCNP) modeling. The forward-looking models generated include varying combinations of mineralogy, formation fluid density, borehole holdup, completion configurations, and formation gas pressure and density.

Through its triangulation technique, the OmniView service models oil-, water-, and gas-saturated zones based on input parameters for the MCNP modeling. Use these triangulated models to analyze data recorded from the GasView service and C/O measurements to deliver a salinity-independent, quantitative three-phase formation fluid solution through casing.

This integrated analysis provides the industry’s first three-phase saturation measurement through the casing, which you can use to optimize reservoir development planning or extend the production life of your mature, marginal fields.

Contact us to learn how the OmniView three-phase fluid saturation analysis service can deliver quantitative, salinity- independent saturation analysis of every fluid through your casing.

Resources

OmniView Service determines three-phase formation fluid saturations and reduces ambiguities in reservoir monitoring
PDF
PDF: 796.66 KB
.PDF 796.66 KB
Case Study
OmniView service identified bypassed oil reservoirs and added 7,000 bopd to production
PDF
PDF: 641.48 KB
.PDF 641.48 KB
Case Study
RPM 3-phase triangulation technique enabled better understanding of SAGD reservoir depletion
PDF
PDF: 371.66 KB
.PDF 371.66 KB


Get in touch with an expert.

Your request has been submitted.
Thank you for your interest. A specialist will be in touch with you shortly.