You need your equipment to be in top shape at all times. It is strongly advised to ensure that the certification of your UTTM electronics or your UT portable equipment does not run out of date. Waygate Technologies, as the manufacturer, recommends annual recertification to comply to the applicable standard as well as to minimize downtime and keep your plant running most efficiently. We can certify our UT equipment according to many official standards and norms. This certification can be done at your site or in one of our Waygate Service facilities.
Waygate ndt calibration and certification services are beneficial to you as the plant operator for several reasons. You are able to receive dedicated service right from the manufacturer of your equipment. You can receive service in your own facility or at one of our repair shops. We allow for flexible scheduling for planned interventions through our back office teams to plan your downtime and therefore keep your equipment running at maximum when you need it to.
When you need assistance at your site, connect with our Remote Support experts. They troubleshoot over the phone, initiate that a Field Service Engineer will be sent to your site, prepped with all the information and recommendations from Remote trouble shooting. In order to be well prepared for any time critical system-down event, we strongly recommend having a Remote Service Agreement in place with us which enables us to help you instantly.
Onsite NDT calibration service and NDT electronics certification can be done onsite at your facility and according to these norms and standards:
|UT Testing Machine Electronic||Specification|
|Hector USIP|xs PAC||ISO 18563-1:2015 Group 2|
|Hector USIPxs-PAC-CV Eco-line||ISO 22232-1:2020 Group 2|
|Hector USIPxs-CV Pro.Line||ISO 22232-1:2020 Group 2|
|USIP|xx PA64;PA64-RX; PA64-RX||ISO 18563-1:2015 Group 2|
|PA4-Standard||ISO 18563-1:2015 Group 2, AITM_6-0016_2014-10_5 and Boeing BSS7052|
|PA4-Mod. Pulser||ISO 18563-1:2015 Group 2|
|PA4-Plate||ISO 18563-1:2015 Group 2|
|PM3.76.xx;PM3.75.xx||ISO 18563-1:2015 Group 2|
|VPA GEN3||ISO 18563-1:2015 Group 2|
|AMB.16.32||ISO 22232-1:2020 Group 2|
|UTX.72.45||ISO 22232-1:2020 Group2 and AITM_6-0013_2014-10_6|
|UTX.50.xx; UTX.60.xx ; UTX.55.xx ; UTX.71.xx ; UTX.72.xx ; UTX.75.xx||ISO 22232-1:2020 Group2|
|VIS VCB ; VCB MUX||ISO 22232-1:2020 Group2|
|USIP40||ISO 22232-1:2020 Group2, AMS 2630, ASTM E-317, ASTM B594, BSS7052, BSS7055, BAC 5439, AMS-STD 2154, CSTI006 and P.S. 21211|
Waygate technicians can take care of certification of your UT/EC/Hardness portable device as well. It’s more common and usually more cost effective to send your portable device into one of our repair shops for calibration/certification than to have this completed at your location. However, if you have a larger fleet, or you have very critical up-time needs, please contact us about a tailored option to perform on-site service at your facility. We will do what we can to find a way to support you!
Our UT/EC/Hardness portable devices can be certified according to the following norms:
|MENTOR UT PA||ISO 18563-1|
|MENTOR UT CV||EN 12668-1 Grp.2|
|Phasor XS||EN 12668-1 ISO 22232|
|USLT 2000 (USB )||manufacturer|
|USM 22 / 23 / 32||manufacturer|
|USM 25 / 33||EN 12668-1 manufacturer|
|USM 35||EN 12668-1 manufacturer|
|USM 35 X||EN 12668-1 ISO 22232 manufacturer|
|USM 36||EN 12668-1 ISO 22232 manufacturer on request|
|USM GO||EN 12668-1 manufacturer on request|
|USM GO+||EN 12668-1 ISO 22232 manufacturer on request|
|USN 58||EN 12668-1 manufacturer|
|USN 58 SW||EN 12668-1 ISO 22232 manufacturer|
|USN 60||EN 12668-1 manufacturer|
|USN 60 SW / ND||EN 12668-1 ISO 22232 manufacturer|
|Reference blocks K1 / K2 / VW / N30||manufacturer|
|Probes CV||EN 12668-2 (soon: ISO 22232) manufacturer|
|DM 5 E||EN 15317 manufacturer|
|DME / DME DL / DMV DL||manufacturer|
|DMS GO||EN 15317 manufacturer on request|
|DMS GO +||EN 15317 manufacturer on request|
|T-Mike E / EM||manufacturer|
|DynaMIC / DL / D||manufacturer|
|MIC 10 / DL / Probe||manufacturer|
|MIC 20 / TFT||manufacturer|
|LOCATOR 2 / 3||manufacturer|
|PHASEC 2200 / 2D / S / 3 / 3D||manufacturer|
Probe calibrations require measurement devices and tools that we can only operate inside our Waygate facilities. Therefore, probe calibrations cannot be performed in the field. To initiate our in-house service, please request an RMA # by following this link: https://store.bakerhughesds.com/home or contacting a member of our back office team.
We understand that time is money. When you send your equipment to us for servicing or repairs, we will always try to get your equipment back to you as soon as possible and keep your downtime to a minimum. For our standard devices, we endeavor a turn-around-time of one week. Our UTTM electronics calibration/certification is more complex and therefore requires around two weeks in our shop. Please excuse that during our busy periods this may take longer.
The RMA # (Return Material Authorization) is the unique identifier of your individual in-house service event with Waygate Technologies. We will issue an RMA # to you prior to any shipment into our facility to ensure that your equipment gets recognized and properly routed when we received it.
Yes, please communicate this upfront so the RMA can be issued accordingly.
Yes, only 1 label is required outside of the box, but please put all RMA sheets inside.
No, a new shipment always requires a new RMA #.