Product Overview

The PV 623 solves many of the problems associated with hydraulic pressure generation by generating pressure to 1000 bar (15000 psi) without the need for system priming and by providing a stable pressure within 1 minute.


  • ATEX approved for hazardous areas
  • Advanced pressure generation
  • – PV 621 IS 95% vacuum to 20 bar (300 psi) pneumatic
  • – PV 622 IS 95% vacuum to 100 bar (1500 psi) pneumatic
  • – PV 623 IS 0 to 1000 bar (15000 psi) hydraulic
  • Replacement for hand pumps and gas bottles
  • Test gauge comparator
  • Quick-fit pressure connection system requires no tools or sealing tape
PV 620 series accessories

Pressure station carrying case (P/N IO620-CASE-3-IS) 

An anti-static fabric carrying case with shoulder strap and large pocket for accessories.

Pressure adaptor set

A set of test point adaptors to connect the PV 62X “quick-fit” tool-less pressure port to the device under test. 

P/N IO620-BSP: G 1/4, G 3/8 and G 1/2 female, G 1/8 and G 1/4 male

P/N IO620-NPT: 1/4”, 3/8”, and 1/2” female, 1/8” and 1/4” male

P/N IO620-MET: 14 mm and 20 mm female

Comparator adaptor (P/N IO620-COMP)

The adaptor connects to the PV 62X pressure port and provides two outlet ports; one for a reference instrument and the other for the device under test. Compatible with the test point adaptors supplied with the PV 62X, the adaptors sets and the extension hoses.

Blanking plug (P/N IO620-BLANK)

Allows the PV 62X to be used as a pressure generator independently of the DPI 620 and PM 620 by blanking the PV 62X pressure module port.

Associated products

DPI 104-IS Druck digital test gauge

  • ATEX, IECEx, cETL (Canada)
  • 0.05% full scale (FS) accuracy
  • Pressure ranges to 1400 bar (20000 psi)
  • % pressure indication and additional bar graph for quick visual reference
  • Pressure switch test
DPI 620 advanced modular

The PV 62X series is the first ATEX approved module of the Druck DPI 620 advanced modular calibration system. The DPI 620 multifunction calibrator and PM 620 pressure modules will be available with ATEX approval towards the end of 2009.

For more information please refer to the DPI 620 series datasheet.

Please note the PV 62X series pressure stations may require a change to the ATEX information label attached to the product before they can be used with the DPI 620 and PM 620.


Datasheets - PV 620 IS

Contact Us | Support

For more information on Druck products or to reach a member of your local Druck team please click > here

You can contact the Druck Support Team > here

Póngase en contacto con un experto.

Su solicitud ha sido enviada.
Gracias por su interés. Un especialista se pondrá en contacto con usted en breve.