Product Overview
Features
  • Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
  • Single or dual range configuration
  • IDOS pressure sensors provide accuracies to 0.05% FS allinclusive or 0.01% precision
  • mA measure, switch test and 24V loop power
  • Large backlit display, menu driven interface
  • HART® loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protected
  • Plug and play connector for IDOS universal measurement modules
Applications
  • Pressure test and maintenance
  • Transmitter calibration
  • Loop set-up and diagnostics
  • Switch verification


The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more  applications in less time and deliver results you can rely on.

All-inclusive accuracy
Can be relied on from one year to the next, even in tough environmental conditions (see specifications)

Dual sensor configuration
Extended measurement range and simultaneous two channel reading (P1 and P2 or P1 - P2)

Stainless steel sensor construction
Available for compatibility with a wide range of fluids and gases (refer to range table)

Programmable leak test
Reports the pressure drop and leak rate 

Advanced features
Hold, maximum/minimum/average, alarm, and tare facilitate troubleshooting

Pressure instrument and loop maintenance

DPI 802 pressure loop calibrator
Provides simultaneous pressure and mA measurement for transmitter and loop maintenance

Dual readings
Simultaneous measurement of pressure and mA for transmitter calibration and loop maintenance

24V loop power supply
Energizes transmitters and control loops

Automatic switch test
Captures open/closed trip values providing a fast and highly accurate “safety system” check

HART resistor
Can be switched into the loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250 Ω resistor


 

Pressure test and measurement

DPI 800 pressure indicator
The ideal tool for pressure test and measurement

Pressure ranges
10 in H2O to 10,000 psi (25 mbar to 700 bar) including vacuum options

IDOS™ flexibility

Intelligent Digital Output Sensor (IDOS)
Universal pressure modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar).

Total flexibility
IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator.

Plug and play
Modules are interchangeable between instruments, requiring no set-up or instrument calibration.

Range expansion
Achieved by adding modules (please refer to the IDOS Universal Pressure Module datasheet).

DPI 800 series common specification

Operating temperature
14°F to 122°F (-10°C to 50°C)

Storage temperature
-4°F to 158°F (-20°C to 70°C)

Humidity
0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III 

Shock and vibration
BS EN61010:2001, Def Stan 66-31, 8.4 Cat III

EMC
BS EN61326-1:1998 + A2:2001

Safety
Electrical BS EN61010:2001. Pressure Equipment Directive (PED),
Class SEP. CE marked

Display
Graphic LCD with backlight. Resolution 99999

Size (l x w x h) and weight
7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 18 oz (500 g)

Batteries
3 AA alkaline, >50 hours measure, >10 hours 24V source

Accessories

IO800A
Soft fabric carrying case with accessory pocket

IO800B
Belt clip, wrist strap/hanging loop and bench stand

IO800C
NiMh batteries with charger, batteries charged externally

IO800E
Data logging upgrade and RS232 lead Log data periodically (1 s to 23h 59m 59s) or manually by key press. 

Review data on-screen or upload to a PC via the RS232 interface. 

No software purchase is necessary as standard Microsoft® applications provide data transfer (HyperTerminal) and analysis (Excel). 

Alternatively, print directly to a compatible serial printer. Real time clock with date. 

Memory: 1000 single or 750 dual reading screens with date and time. Header tag: 6 user characters to identify groups of readings. 

RS232: 19200 baud, 8 data bits, 1 stop bit, no parity, Xon/Xoff. Data output: comma separated ASCII.

Datasheet

Datasheets - DPI 800/802



Contact Us | Support

For more information on Druck products or to reach a member of your local Druck team please click > here

You can contact the Druck Support Team > here


전문가에게 문의하십시오.

요청이 제출되었습니다.
관심을 가져 주셔서 감사합니다. 전문가가 곧 연락드릴 것입니다.