Highlights

Highlights


Benefits

  • Immediately get the real-time pressure profile from FIT/LOT
  • Accurately determine your formation’s leak-off and breakdown pressures
  • Quickly detect and be alerted of flowback anomalies with enhanced smart flowback monitoring
Applications

  • Determine cement strength around the casing shoe after shoe drill-out
  • Assess fracture pressure gradient to optimize mud programs and compute kick tolerances
  • Determine current maximum allowable annular surface pressure (MAASP) for well control

Overview

Overview

Get the pressure profile from your formation integrity test/leak-off test (FIT/LOT), in real time, with the AccuFIT™ real-time flow-off pressure data service from Baker Hughes. By enabling pressure data to be transmitted uphole immediately after the test, the AccuFIT service improves the quality and accuracy of measurements compared to surface-based FIT/LOT methods.

 

Increase measurement accuracy with real-time pressure data

FITs and LOTs are valuable methods of evaluating the maximum pressure an openhole section can tolerate. But conventional, surface-based tests are limited due to challenges with data accuracy from the cementing unit and rig pump pressure gauges. Cased hole effects—including mud compressibility, gas trapped in drilling fluid, and casing expansion—also limit the accuracy of the pressure data acquired.

The AccuFIT service resolves these challenges by providing real-time, downhole data. The service delivers an initial 60-point pressure-versus-time curve for the entire LOT/FIT interval. The profile is detailed enough to visualize the entire flow-off event immediately, and determine the leak-off pressure and breakdown pressure, if reached. It also estimates slopes for the time after breakdown pressure.

The AccuFIT service is an expansion of the current Min/Max flow-off annular pressure offering from the proven OnTrak™ and AziTrak™ tools. But while these tools required pulling out of hole (POOH) to download the flow-off annular pressure data from the OnTrak/AziTrak memory, the AccuFIT service commences initial transmission downhole, immediately after circulation resumes. No time-consuming rig downlink is required.

If higher resolution data is required for a particular time interval of interest, the AccuFIT service can “zoom in” by sending an additional downlink for 60 data points over that shorter time interval. A downlink to cancel LOT/FIT transmission can be sent downhole when the service is no longer required or enable it when needed.

Display the pressure profile remotely over the internet or your company’s intranet using the WellLink™ RT automatic data delivery system.

As the demand for downhole, real-time FIT/LOT data becomes a requirement in your safety and regulation standards, the AccuFIT service stands ready to meet your needs—in any offshore well around the globe.

Contact us today to learn how the AccuFIT real-time flow-off pressure data service can optimize your FIT and LOT pressure evaluations.




Mettetevi in contatto con un esperto.

La vostra richiesta è stata inoltrata.
Grazie per l'interesse dimostrato. Uno specialista vi contatterà a breve.