Druck’s DPI610E switch testing function keeps the water flowing at a water treatment plant
Druck’s DPI610E switch testing function keeps the water flowing at a water treatment plant
A water treatment plant uses the Druck DPI610E portable pressure calibrator to maintain switch valves.
Industry supplied: Water utility
Application: DPI610E pressure calibrator used to verify that the valve switches are operating normally to maintain system water pressure.
The customer:
Our Applications Engineer was approached by a national utility in Europe for a portable solution for in-the-field switch testing of valves controlling water pressure.
Customer challenge
Water processing plants require the water to be pumped through the system at a specified pressure. If the water pressure drops, then a switch will be activated to start a compressor to maintain the required pressure. Once reached and maintained the switch will indicate that the compressor can be stopped.
Our customer required a cost effective, portable calibrator with a switch testing function for use with engineers on site.
Druck technology used:
Find out more about the DPI610E and Druck Hydrology solutions
DPI610E
💻 DPI610E
Hydrology Solutions
📰 Druck Hydrology Digital Brochure
Druck Submersible Level Sensors
📍 PDCR 1830 17.5 mm titanium sensor
📍 PTX 1830 17.5 mm titanium sensor
📍 UNIK5000 25mm stainless steel, highly configurable with depth options
📍 DPS5000 SDI12 25mm stainless steel, digital processing with SDI-12 output protocol
📍 DPS5000 I2C 25mm stainless steel, digital processing with I2C output protocol
📍 RPS/DPS8000 25mm stainless steel, exceptional accuracy and stability with TERPS performance
📍 RPS/DPS8300 25mm Hastelloy, exceptional accuracy and stability with TERPS performance