Overview

 

Optimized designs

Baker Hughes offers a wide range of tensioner systems, from conventional pull-up tensioners typically seen on tension leg platforms (TLPs), to long-stroke, in-line ram tensioners traditionally used on spar platforms. We optimize our designs on a project-by-project basis to meet your specific requirements with the most compact, cost-effective solution.

 

Conventional TLP tensioners
  • Compensate for angular offset between vessel and riser
  • Compact systems for shorter strokes to save on deck spacing
  • Cylinders replaceable during operation
  • Configurable cassette frame for lower centralizer during drilling operations
  • Large opening through cassette frame for passing tieback connectors
  • Composite accumulator bottle for weight savings up to 80% over alternative designs

 

Ram-style tensioners
  • All operations above lower deck
  • Full piston area used to develop tension, resulting in higher capacities
  • 80% reduction in fluid volume, leaving more volume for gas and resulting in low-stiffness systems
  • All components, including accumulators (if needed), can be mounted in a single well bay
  • High-pressure seals are all internal. Seals that interface with exposed seal surfaces are for low pressure annulus containment only
  • System internally reacts to bending moments if a cylinder loses pressure
  • Allow for use of short, untapered tension joint

Fragen Sie den Experten.

Ihre Anfrage wurde abgeschickt.
Vielen Dank für Ihr Interesse. Ein Experte wird sich in Kürze mit Ihnen in Verbindung setzen.